Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who enjoys the responsiveness of gas cooktops, but still requires an oven to bake in? Find a dual-fuel range cooker that offers the best of both worlds.
Gas cooktops are preferred by many home chefs who have years of experience in the kitchen due to their superior temperature control. They also allow them to use advanced cooking techniques like charring. These stoves are costly though, especially if you require an additional gas hook-up and electrician for installation.
What is a 13amp plug?
If you have a dual fuel range cooker (also known as an electric and gas oven) is required, you'll need a suitably rated 13 amp plug. The plug will also need to be wired hard into the cooker ring circuit by a fully competent electrician.
This ensures that the current flowing through the plug is safe and not excessive, which could create an electrical fire danger. The plug is equipped with a fuse that controls the current. The fuse goes out as soon as the current passes through it beyond its capacity, which safeguards the appliance from an overcharge of electricity.
The fuse is rated 13 amps, as shown on top of the plug. This indicates the maximum amount of current that the plug can pass without damaging the appliance or causing heat to the socket. When replacing fuses, it's crucial to use the same amperage rating as the original. You run the risk of overheating the socket if you replace a fuse using a different rating.
Ceramic 13 amp fuses are extremely durable, and can withstand the high temperatures that can be generated by a range cooker. Ceramic is also fire-resistant, which makes it a more suitable choice than other types of fuse.
There are several ways in which 13 amp plugs can be fitted. It could be wired to an existing live socket. the flex is then connected to it using an screw or a plastic jaw type cord clamp. The cord clamp should be tightened after the plug has been tightly pushed into place.
Before connecting the wires you may have to remove the cardboard wiring diagram that is placed over the pins of certain plugs. It is vital that the wires are trimmed to the correct length as being too long can cause them to break when the plug cover is replaced. The earth wire must be the longest in order to connect it prior to the line and neutral pins.
How do I install an outlet with 13amps?
The majority of dual fuel range cookers in the UK are connected to a 13 amp plug socket and this is crucial since ovens draw a substantial amount of current, and standard plug sockets are capable of 10 amps.
In general, new appliances should have a plug installed at the point of sale. This is to comply with the Plugs and Sockets etc. (Safety Regulations) 1994. Older appliances may not have a plug connected and this could be the reason for the issue.
The first thing to consider when connecting a cooktop to an existing plug socket is to ensure that the fuse rating of the fuse box is in line with that of the plug. Click That Link is important since a fuse that is not properly sized can be dangerous.
It is also important to check that the fuse is fully installed within the cartridge and that there isn't any excessive movement within it. Next up is to prepare the flex to be used. Remove the sheathing to expose the three conductors that are insulated. Utilize a utility knife to nick the sheathing just beyond the cord grip at the point of entry into the plug. This won't penetrate the insulated conductors. This nick must be large enough to allow for the sheathing and cable to separate as the sheathing is pulled back. Finally, cut off the excess sheathing leaving about 40mm extending beyond the flexing end.
This flex is placed over the plug with the earth terminal at the top, and the live and neutral terminals at the bottom. Utilizing the colored conductors to guide you, the sheathing is then removed from each pin, and the internal cable is fixed to the correct terminal using the cord grip. If the plug is fitted with an screw-type clamp for cords, loosen this and then pull back the insulation to expose the copper conductors. Finally, connect each conductor that is insulated to the appropriate terminal (starting with the earth before neutral, and then the live) by using the channel they are running through in the plug.
What is the maximum draw of a 13 amp plug?
The maximum current draw for 13amp plugs at 3kw at 230 volts is. This is a lot of power, however the standard fuse in a UK plug will not fail until the cable is heated to a dangerous temperature. It is important to be aware of the amount of power you're using in your kitchen as a faulty plug or socket can lead to an explosion.
The ceramic fuses used in plugtops measure around 25mm and are rated for mains voltage of 240V. The fuses are marked with a BS Kitemark or a similar mark on their side, and they'll also contain sand. There are plastic or glass alternatives but they should not be used with a live plug except if you don't want to blow the fuse and potentially get electrocuted!
In the UK the majority of dual fuel range cookers are wired. They cannot be plugged directly into a wall outlet. They are usually connected using a dedicated cooker circuit, that is only suitable for appliances that can handle up to 20 amps.
Check the ring circuit of your home using the fuse box, or call a local electrician. Ask them if the sockets are on the same ring or if they're separate. They should also be able to inform you if there's a separate circuit to power your oven.
If you're in the market for a new dual fuel range cooker, the size of your kitchen is an important aspect to take into consideration. Luckily, we have a wide selection of cookers to suit any space, from small 50-60cm dual fuel models, as well as massive 90cm + double oven options from the top brands such as Rangemaster and StovesAreUs.
We also offer a wide selection of multi-function gas and electric cookers. These multifunction cookers can be used to cook a variety meals including pasta, casseroles and curries!
Currys offers a broad selection of Cookers. Explore our online collection or visit us in our store to view them. We provide free home installation and delivery on certain range cookers, as well as flexible payments options. Our team is available to answer any questions you have. Contact us via email or by phone. Credit is subjected to status, and terms and conditions apply.
What is the most draw for the switch on a cooker?
There is lots of confusion regarding what the maximum current draw of a cooker switch actually is. Most cookers are hard-wired, and connected to a specific oven-ring circuit not a standard socket. This is because they typically consume more than 20 amps when both the electric hob and gas oven are used.
Therefore, you will not find a dual range cooker with a fuel source that can be connected to a standard socket because this could create a serious fire risk and would be against electrical regulations. An experienced electrician will install any new electrics to a cooker in the kitchen and ensure that the load (both the oven and the hob) do not exceed the supply capability of the circuit.
The benefits of a dual fuel cooker include the responsive cooking power of a gas stove along with the precision of an electric oven. They are therefore a favorite among both chefs and home cooks. If you're looking to test different cooking techniques, such as searing and charring, a dual fuel range cooker is the perfect choice.
When purchasing a new range cooktop, you must be aware of a number of aspects, including size, functionality, and price. You will also require gas connections in your home for the appliance. If you are unsure then book an appointment with a Gas Safe engineer to inspect your property before installation.
The Currys range of dual fuel range cookers has options that can be adapted to a range of budgets, from affordable models from Indesit and Zanussi to our exclusive Essentials collection. If you're looking for something little more advanced we also carry a variety of top JennAir models, with several innovative features.
When you purchase a new dual fuel range cooker, it is important to check the manual of the owner for specific details on the gas and electrical requirements. You must ensure that your house has a suitable gas hook-up and you may have to get a plumber to install it for you if it is required. It is also possible to require a dedicated cooker-ring circuit, installed by a qualified electrical engineer.